Rotronic HC2-HPxx

The insertion probe is suitable for measurement in bulk materials, bricks, concrete, etc. It measures humidity and temperature and calculates the dew/frost point.

Description

Handheld Probe for Measuring Bulk Packaged Materials

The insertion probe is suitable for measurement in bulk materials, bricks, concrete, etc. It measures humidity and temperature and calculates the dew/frost point.

Applications
10 mm insertion probe: measurements in dusty bulk materials such as flour, sugar, etc.

Features

  • Range of application: -40…85 °C / 0…100 %rh
  • Digital interface (UART) and scalable analog outputs, 0…1 V
  • Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
  • Adjusted at 23 °C and 10, 35, 80 %rh

Specifications

Probe typeInsertion probe
Dimensions280 mm / 500 mm
Weight200 g
For use withHygroLab C1, HP23-AW-A
Operating range-40…85 °C / 0…100 %rh
Range of application-40…85 °C (-40…185 °F) / 0…100 %RH
Accuracy at 23 ±5 °C± 0.008 aw / 0.8 %rh / ±0.1 K
Accuracy w. adjustment profile “standard”at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Power supply3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
Long-term stability
Humidity sensorHYGROMER® WA-1 / Pt-100, 1/3 DIN Class B
Temperature dependence0.001 K/K, 0.0002 aw/K
Temperature sensorPT100 1/3 DIN Class B
Filter typeSintered steel with 5 μm pore size
Response time t 63
Allowed wind speed40 m/s, with filter
Psychrometric calculationsDew or frost point
Reproducibility Airchip
Start-up time1,5 s
Measurement interval1 s
Exploitation softwareROTRONIC HW4
Probe adjustment by software1 Point & multipoint %rh & °C
Firmware updateWith internet and HW4 software
User informationfrom Software HW4 (devicemanager)
Data processing via HW4with interface cables
Device Protection by passwordYes
Type of output signals2 x 0…1 VDC
Analogue outputs scaleable by the userYes
Analog output signal (standard)0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)UART
Service InterfaceUART
Reverse voltage protectionMechanically in the connector
Max. cable lengthUp to 5 m with passive cable. Up to 100 m with active cable.
Probe materialStainless steel 1.4305 (V2A)
Enclosure materialPOM
MaterialStainless steel DIN 1.4305 (probe), POM (handle)
IP protection ratingIP50
FDA/GAMP compatibilityFDA 21 CFR Part 11 and GAMP compatible
FDA / GAMPFDA 21 CFR part 11 / GAMP5
CE / EMC conform2007 / 108 / EG

Documentation

Datasheet (PDF)

Go to Top