Rotronic HC2-S-HH

Rotronic HC2-S-HH: The Probe for Hydrogen Peroxide Environments

Description

The Probe for Hydrogen Peroxide Environments

Hydrogen Peroxide Sterilization
Hydrogen peroxide (H2O2) is used to sterilize cleanrooms, incubators and other equipment. In this process the air is saturated by gassing or spraying, resulting in the formation of a microfilm on all surfaces. The hydrogen peroxide kills off all microorganisms. The H2O2 is then either recovered mechanically or allowed to decompose naturally over a period of 48 hours to harmless H2O or O2. The humidity level during the application is crucial for the effectiveness of the process.

Standard humidity sensors have difficulty measuring accurately in high concentration H2O2 environments. The Hydrogen Peroxide inhibits the measurement of water vapour by occupying the pores on the surface of the sensor. This is why ROTRONIC has developed a special sensor, the HYGROMER® HH-1. The life of the sensor is greatly extended compared with that of the standard sensor for these applications. Please see the sensor data sheet for exact technical data on the sensor.

Features

  • Measures relative humidity, temperature and dew point
  • With HYGROMER® HH-1 sensor for hydrogen peroxide environments
  • Highest possible measuring accuracy
  • Conforms to FDA CFR21 Part 11/GAMP

Specifications

Probe typeHumidity and temperature probe for hydrogen peroxide applications (H2O2)
Accuracy±0.8 %RH, ±0.1 K, at 10…30 °C
Measuring range with integrated probe-50…100 °C / 0…100 %rh
Accuracy analog output±1 mV
Power supply3.3…5 VDC
Current consumption4.5 mA at 3.3 VDC
Humidity sensorHygromer HH-1
Continuous H2O2 load880 ppm / 1200 mg/m3
Temperature sensorPT100 1/3 DIN Class B
Filter typeNo filter
Response time t 63
CalculationsDew / Frost point
Audit Trail/ electronic recordsFDA 21 CFR Part 11 and GAMP compatible
Analog output signal (standard)0…1 V = 0…100 %RH
0…1 V = -40…60 °C
(default setting, freely scalable via HW4 software and AC3001 cable)
Communication interfacesUART
HousingPolycarbonate
IP protection ratingIP65
CE / EMC conformEMC Directive 2007/108/EC
Storage and transport conditions-50…100 °C

Documentation

Datasheet (PDF)

Go to Top