Price on request Request a quote
The HC2-HS probe from Rotronic is ideally suited for measuring in stacks of paper or textiles. Due to its flat shape, the stack in which it is measured is moved minimally.
The HC2-HS probe from Rotronic is ideally suited for measuring in stacks of paper or textiles. Due to its flat shape, the stack in which it is measured is moved minimally.
Applications
Paper, printing and textile industry with handmeters and data loggers
Features.
| Probe type | Sword probe |
|---|---|
| Weight | 220 g / 240 g |
| Operating range | -40…85 °C / 0…100 %rh |
| Accuracy at 23 ±5 °C | ±0.8 %rh / ±0.1 K |
| Accuracy w. adjustment profile “standard” | bij 23 °C / 10, 35, 80 %Rh ± 0,8 %Rh / ± 0,1 K |
| Power supply / Power consumption | 3.2…5 VDC ±0 % / < 4.5 mA |
| Long-term stability | <1 %rh / year |
| Humidity sensor | Hygromer IN-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Probe protection | Slots in sword blade |
| Response time t 63 | <15 sec. |
| Allowed wind speed | 3 m/s |
| Psychrometric calculations | Dew or frost point |
| Reproducibility Airchip | <0.02 %rh / 0.01 K |
| Exploitation software | ROTRONIC HW4 |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Firmware update | With internet and HW4 software |
| User information | from Software HW4 (devicemanager) |
| Data processing via HW4 | with interface cables |
| Device Protection by password | Yes |
| Type of output signals | 2 x 0…1 VDC |
| Analogue outputs scaleable by the user | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Digital output signal (standard) | UART |
| Service Interface | UART |
| Reverse voltage protection | Mechanically in the connector |
| Probe material | Aluminium |
| Probe cable material | TPU |
| Enclosure material | Handle: POM, black / probe: Aluminum |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
