Rotronic CF1-serie

Rotronic CF1-serie: CO2, temperatuur en vocht meten met een sensor die gezien mag worden.

Categorieën: , Tag:

Beschrijving

CO2, temperatuur en vocht meten met een sensor die gezien mag worden.

De CF1 serie is de nieuwste CO2-transmitter van Rotronic met geïntegreerde vocht- en temperatuursensor. Het elegante ontwerp past perfect in kantoren, woonkamers, publieke ruimtes, etc.

Kenmerken

  • Meet CO2, relatieve vochtigheid en temperatuur
  • Hygromer® IN-1 vochtsensor
  • Aanpasbaar naar 35%RV of 80%RV
  • Klein formaat

Specificaties

ParametersHumidity / temperature and CO2
DimensionsType R: 131 x 86 x32 (H,W,D) mm
Type S: 120 x 86 x 32 (H,W,D) mm
Type D: 82 x 117 x 32 (H,W,P) mm
WeightType R: approx.115 g / Type S: approx.135 g / Type D: approx. 220 g
Range of applicationElectronics: 0 .. 50 °C Measuring range probe dependent 0 .. 100 %RH, non-condensing
Accuracy at 23 ±5 °C0 .. 2000 ppm: ± 40 ppm ± 3 % of measured value
0 .. 5000 ppm: ± 10 % of measured value
Measurement principleInfrared (NDIR)
Measurement ranges0..2000 ppm or 0..5000 ppm
Adjustment points400 ppm and 35, 80 %RH
Pressure dependency+1.6 % reading per kPa
Power supply / Power consumption12..28 VAC / 15..40 VDC
max. 86.5 mA
Long-term stability< 1.5 %RH per year
Humidity sensorROTRONIC HYGROMER® IN-1
Standard temperature scale0…50 °C or 0…100 °F
Temperature sensorThermistor
Response timeRH: 30s (63 % of a rise 35 .. 80 %RH) without filter / T: 4 s / CO2:
Analog outputs3 analog outputs (1 for each parameter) The mA and V output is not exchangeable. It is always fixed as mA or V. CF132 is the current output, CF135 is the voltage output
Analog output signal (standard)4 .. 20 mA / 0..1 V / 10 V exchangeable via SW21/HW4 software
Enclosure materialABS
IP protection ratingType S/R: IP30 Type D: IP65, without probe
Load per analog outputV signal: ≥1kΩ / V; mA signal: ≤500 Ω
RelayExchangeable via software for each parameter
max. switching voltage: 30 VDC / 125 VAC
max. switching load: 1A at 30 VDC / 0.5A at 125 VAC
min. switching load: 0.01 mA at 10 mV DC
RoHs conformityYes
CE / EMC conform2014/30/EU / EN61000-6-1 / EN61000-6-2 / EN61000-6-3 / EN61000-6-4

Documentatie

Datasheet (PDF)