Rotronic HC-HP28

Insteekvoeler voor het meten van verpakte bulkmaterialen

Categorie:

Beschrijving

Insteekvoeler voor het meten van verpakte bulkmaterialen

De insteekvoeler is geschikt voor metingen in stortgoederen, bakstenen, beton, etc. Hij meet vochtigheid en temperatuur en berekent het dauw- / vriespunt.

Toepassingen
10 mm insteekvoeler: metingen in stoffige bulkmaterialen zoals bloem, suiker, enz.

Kenmerken
• Toepassingsgebied: -40… 85 ° C / 0… 100% RV
• Digitale interface (UART) en schaalbare analoge uitgangen, 0… 1 V
• Standaard uitgangsschaling: 0… 1 V = -40… 60 ° C / 0… 100% rv
• Afgesteld op 23 ° C en 10, 35, 80% RV

Documentatie

Brochure Wateractiviteit (Engels – PDF)

Specificaties

Accuracy at 23 ±5 °C± 0.008 aw / 0.8 %rh / ±0.1 K
Accuracy w. adjustment profile “standard”at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Probe typeInsertion probe
Operating range-40…85 °C / 0…100 %rh
For use withHygroLab C1, HP23-AW-A
Range of application-40…85 °C (-40…185 °F) / 0…100 %RH
Power supply3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
Long-term stability<1 %rh / year
Humidity sensorHygromer IN-1
Temperature dependence0.001 K/K, 0.0002 aw/K
Temperature sensorPT100 1/3 DIN Class B
Filter typeSintered steel with 5 μm pore size
Response time t 63<20 s, with filter
Allowed wind speed40 m/s, with filter
Psychrometric calculationsDew or frost point
Measurement interval1 s
Reproducibility Airchip<0.02 %rh / 0.01 K
Start-up time1,5 s
Exploitation softwareROTRONIC HW4
Probe adjustment by software1 Point & multipoint %rh & °C
Software UpdateWith internet and HW4 software
User informationfrom Software HW4 (devicemanager)
Data processing via HW4with interface cables
Device Protection by passwordYes
Analogue outputs scaleable by the userYes
Analog output signal (standard)0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)UART
Type of output signals2 x 0…1 VDC
Enclosure materialPOM
IP protection ratingIP50
MaterialStainless steel DIN 1.4305 (probe), POM (handle)
Max. cable lengthUp to 5 m with passive cable. Up to 100 m with active cable.
Probe materialStainless steel 1.4305 (V2A)
Reverse voltage protectionMechanically in the connector
Service InterfaceUART
FDA / GAMPFDA 21 CFR part 11 / GAMP5
FDA/GAMP compatibilityFDA 21 CFR Part 11 and GAMP compatible
CE / EMC conform2007 / 108 / EG
DimensionsHC2-HP28: Ø10 x 280 mm
Weight200 g
Go to Top