De HC2-HP voelers zijn hand insteekvoelers van ø10mm. Er zijn 2 verschillende lengtes beschikbaar, namelijk 280mm en 500mm. De filter aan het eind is verwisselbaar en zorgt dus voor een langere levensduur van de sensor.
Rotronic HC2-HPxx
Beschrijving
De HC2-HP voelers zijn hand insteekvoelers van ø10mm. Er zijn 2 verschillende lengtes beschikbaar, namelijk 280mm en 500mm. De filter aan het eind is verwisselbaar en zorgt dus voor een langere levensduur van de sensor.
Toepassingen
10 mm insteekvoeler: metingen in stoffige stortgoederen zoals bloem, suiker, enz.
Kenmerken
- Toepassingsbereik: -40…85 °C / 0…100 %RV
- Digitale interface (UART) en schaalbare analoge uitgangen, 0…1 V
- Standaard schaalbare uitgangen: 0…1 V = -40…60 °C / 0…100 %RV
- Instelbaar op 23 °C en 10, 35, 80 %RV
Specificaties
Probe type | Insertion probe |
Dimensions | 280 mm / 500 mm |
Weight | 200 g |
For use with | HygroLab C1, HP23-AW-A |
Operating range | -40…85 °C / 0…100 %rh |
Range of application | -40…85 °C (-40…185 °F) / 0…100 %RH |
Accuracy at 23 ±5 °C | ± 0.008 aw / 0.8 %rh / ±0.1 K |
Accuracy w. adjustment profile “standard” | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
Power supply | 3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA |
Long-term stability | |
Humidity sensor | HYGROMER® WA-1 / Pt-100, 1/3 DIN Class B |
Temperature dependence | 0.001 K/K, 0.0002 aw/K |
Temperature sensor | PT100 1/3 DIN Class B |
Filter type | Sintered steel with 5 μm pore size |
Response time t 63 | |
Allowed wind speed | 40 m/s, with filter |
Psychrometric calculations | Dew or frost point |
Reproducibility Airchip | |
Start-up time | 1,5 s |
Measurement interval | 1 s |
Exploitation software | ROTRONIC HW4 |
Probe adjustment by software | 1 Point & multipoint %rh & °C |
Firmware update | With internet and HW4 software |
User information | from Software HW4 (devicemanager) |
Data processing via HW4 | with interface cables |
Device Protection by password | Yes |
Type of output signals | 2 x 0…1 VDC |
Analogue outputs scaleable by the user | Yes |
Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
Digital output signal (standard) | UART |
Service Interface | UART |
Reverse voltage protection | Mechanically in the connector |
Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
Probe material | Stainless steel 1.4305 (V2A) |
Enclosure material | POM |
Material | Stainless steel DIN 1.4305 (probe), POM (handle) |
IP protection rating | IP50 |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
FDA / GAMP | FDA 21 CFR part 11 / GAMP5 |
CE / EMC conform | 2007 / 108 / EG |