Deze metalen industriële voeler van Rotronic is gemaakt voor hoge temperaturen, veeleisende industriële omgevingen en toepassingen waarbij hygiene een belangrijke rol speelt. Het meet de luchtvochtigheid en temperatuur, en berekent dauwpunt.
Rotronic HC2-IMxxx-M
Beschrijving
Deze metalen industriële voeler van Rotronic is gemaakt voor hoge temperaturen, veeleisende industriële omgevingen en toepassingen waarbij hygiene een belangrijke rol speelt. Het meet de luchtvochtigheid en temperatuur, en berekent dauwpunt.
Toepassingen
Voedingsindustrie, farmaceutische industrie, droogprocessen, industriële productieprocessen
Kenmerken
- Toepassingsbereik: -100…200 °C, (screw-in voeler; -50…200 °C) / 0…100 %RV
- Digitale interface (UART) en schaalbare analoge uitgangen, 0…1 V
- Standaard schaalbare uitgangen: 0…1 V = -40…60 °C / 0…100 %RV
- Instelbaar op 23 °C en 10, 35, 80 %RV
Specificaties
Probe type | Industrial metal probe |
Dimensions | Ø15 x 130 mm / Ø15 x 280 mm / Ø15 x 430 mm / Ø15 x 580 mm |
Weight | 260 g / 400 g / 540 g / 680 g |
Operating range | -100…200 °C / 0…100 %rh |
Accuracy at 23 ±5 °C | ±0.8 %rh / ±0.1 K |
Accuracy w. adjustment profile “standard” | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
Power supply / Power consumption | 3.3 V ± 0.1V / ~4.5 mA |
Long-term stability | <1 %rh / year |
Humidity sensor | Hygromer IN-1 |
Temperature sensor | PT100 1/3 DIN Class B |
Probe protection | Filter carrier, brass nickel plated |
Filter cartridge | depending on the application, order separately |
Response time t 63 | <15 sec. |
Allowed wind speed | 3 m/s |
Psychrometric calculations | Dew or frost point |
Reproducibility Airchip | <0.02 %rh / 0.01 K |
Exploitation software | ROTRONIC HW4 |
Probe adjustment by software | 1 Point & multipoint %rh & °C |
Firmware update | With internet and HW4 software |
User information | from Software HW4 (devicemanager) |
Data processing via HW4 | with interface cables |
Device Protection by password | Yes |
Type of output signals | 2 x 0…1 VDC |
Analogue outputs scaleable by the user | Yes |
Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
Digital output signal (standard) | UART |
Service Interface | UART |
Reverse voltage protection | Mechanically in the connector |
Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
Probe material | Stainless steel 1.4305 (V2A) |
Probe cable material | FEP, black |
Enclosure material | Stainless steel 1.4305 (V2A) |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |