Rotronic HC2A-S

De vernieuwde HC2A-S is de meest veelzijdige voeler van ROTRONIC en vormt de basis van de Rotronic producten. De voeler meet relatieve vochtigheid en temperatuur en berekent dauw-/vriespunt.

Beschrijving

De vernieuwde HC2A-S is de meest veelzijdige voeler van ROTRONIC en vormt de basis van de Rotronic producten. De voeler meet relatieve vochtigheid en temperatuur en berekent dauw-/vriespunt.

Toepassingen
HVAC, voedingsindustrie, gebouwbeheersing, papier-, textiel- en farmaceutische industrie

Kenmerken:

  • Nauwkeurigheid: ±0.8 %rv, ±0.1 K, bij 23 °C ±5 K
  • Bereik: -50…100 °C / 0…100 %rv
  • Digitale interface (UART) en schaalbare analoge uitgangen, 0…1 V
  • Standaard uitgangen: 0…1 V = -40…60 °C / 0…100 %rv
  • Instelbaar op 23 °C and 10, 35, 80 %rv

Specificaties

Probe typeStandard probe
DimensionsØ15 x 108 mm
Weight10 g
Operating range-50…100 °C / 0…100 %rh
Accuracy w. adjustment profile “standard”±0.8 %RH / ±0.1 K, at 10…30 °C
Adjustment at 23 °C and 10, 35, 80 %RH
Accuracy w. adjustment profile “High Precision”±0.5 %RH / ±0.1 K, at 10…30 °C
at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH
Power supply / Power consumption3.3…5 VDC
Current consumption4.5 mA at 3.3 VDC
Long-term stability
Humidity sensorHygromer HT-1
Temperature sensorPt100 Class A
Probe protectionPolycarbonate plastic cage, black
Filter cartridgePolyethylene
Filter typePolyethylene, 40 μm
Response time t 63
Allowed wind speed20 m/s, with filter
Psychrometric calculationsDew or frost point
Reproducibility Airchip
Exploitation softwareROTRONIC HW4
Probe adjustment by software1 Point & multipoint %rh & °C
Firmware updateWith internet and HW4 software
User informationfrom Software HW4 (devicemanager)
Data processing via HW4with interface cables
Device Protection by passwordYes
Type of output signals2 x 0…1 VDC
Analogue outputs scaleable by the userYes
Analog output signal (standard)0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)UART
Service InterfaceUART
Reverse voltage protectionMechanically in the connector
Max. cable lengthUp to 5 m with passive cable. Up to 100 m with active cable.
Probe materialPEEK
Enclosure materialPolycarbonate
HousingPolycarbonate
FDA/GAMP compatibilityFDA 21 CFR Part 11 and GAMP compatible

Documentatie

Datasheet (PDF)