Rotronic HC-HP28

Prijs op aanvraag Offerte aanvragen

Insteekvoeler voor het meten van verpakte bulkmaterialen

Categorie:

Beschrijving

Insteekvoeler voor het meten van verpakte bulkmaterialen

De insteekvoeler is geschikt voor metingen in stortgoederen, bakstenen, beton, etc. Hij meet vochtigheid en temperatuur en berekent het dauw- / vriespunt.

Toepassingen
10 mm insteekvoeler: metingen in stoffige bulkmaterialen zoals bloem, suiker, enz.

Kenmerken
• Toepassingsgebied: -40… 85 ° C / 0… 100% RV
• Digitale interface (UART) en schaalbare analoge uitgangen, 0… 1 V
• Standaard uitgangsschaling: 0… 1 V = -40… 60 ° C / 0… 100% rv
• Afgesteld op 23 ° C en 10, 35, 80% RV

Documentatie

Brochure wateractiviteit Rotronic HC-HP28

Specificaties

Accuracy at 23 ±5 °C ± 0.008 aw / 0.8 %rh / ±0.1 K
Accuracy w. adjustment profile “standard” at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Probe type Insertion probe
Operating range -40…85 °C / 0…100 %rh
For use with HygroLab C1, HP23-AW-A
Range of application -40…85 °C (-40…185 °F) / 0…100 %RH
Power supply 3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
Long-term stability <1 %rh / year
Humidity sensor Hygromer IN-1
Temperature dependence 0.001 K/K, 0.0002 aw/K
Temperature sensor PT100 1/3 DIN Class B
Filter type Sintered steel with 5 μm pore size
Response time t 63 <20 s, with filter
Allowed wind speed 40 m/s, with filter
Psychrometric calculations Dew or frost point
Measurement interval 1 s
Reproducibility Airchip <0.02 %rh / 0.01 K
Start-up time 1,5 s
Exploitation software ROTRONIC HW4
Probe adjustment by software 1 Point & multipoint %rh & °C
Software Update With internet and HW4 software
User information from Software HW4 (devicemanager)
Data processing via HW4 with interface cables
Device Protection by password Yes
Analogue outputs scaleable by the user Yes
Analog output signal (standard) 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard) UART
Type of output signals 2 x 0…1 VDC
Enclosure material POM
IP protection rating IP50
Material Stainless steel DIN 1.4305 (probe), POM (handle)
Max. cable length Up to 5 m with passive cable. Up to 100 m with active cable.
Probe material Stainless steel 1.4305 (V2A)
Reverse voltage protection Mechanically in the connector
Service Interface UART
FDA / GAMP FDA 21 CFR part 11 / GAMP5
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible
CE / EMC conform 2007 / 108 / EG
Dimensions HC2-HP28: Ø10 x 280 mm
Weight 200 g



    Cart
    There are no products in the cart!
    Continue shopping
    0