Prijs op aanvraag Offerte aanvragen
De HC2-HS voeler van Rotronic is uitermate geschikt om te meten in stapels papier of textiel. Door de platte vorm, wordt de stapel waar in gemeten wordt minimaal verplaatst.
De HC2-HS voeler van Rotronic is uitermate geschikt om te meten in stapels papier of textiel. Door de platte vorm, wordt de stapel waar in gemeten wordt minimaal verplaatst.
Toepassingen
Papier-, druk- en textielindustrie met handmeters en dataloggers
Kenmerken
| Probe type | Sword probe |
|---|---|
| Weight | 220 g / 240 g |
| Operating range | -40…85 °C / 0…100 %rh |
| Accuracy at 23 ±5 °C | ±0.8 %rh / ±0.1 K |
| Accuracy w. adjustment profile “standard” | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
| Power supply / Power consumption | 3.2…5 VDC ±0 % / < 4.5 mA |
| Long-term stability | <1 %rh / year |
| Humidity sensor | Hygromer IN-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Probe protection | Slots in sword blade |
| Response time t 63 | <15 sec. |
| Allowed wind speed | 3 m/s |
| Psychrometric calculations | Dew or frost point |
| Reproducibility Airchip | <0.02 %rh / 0.01 K |
| Exploitation software | ROTRONIC HW4 |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Firmware update | With internet and HW4 software |
| User information | from Software HW4 (devicemanager) |
| Data processing via HW4 | with interface cables |
| Device Protection by password | Yes |
| Type of output signals | 2 x 0…1 VDC |
| Analogue outputs scaleable by the user | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Digital output signal (standard) | UART |
| Service Interface | UART |
| Reverse voltage protection | Mechanically in the connector |
| Probe material | Aluminium |
| Probe cable material | TPU |
| Enclosure material | Handle: POM, black / probe: Aluminum |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
